Furuno TZTL12F NavNet TZtouch2 12.1" MFD Chart
Plotter/Fish Finder
With a sleek all-glass front, refined graphical user interface, built-in
RezBoost Fish Finder, and an internal GPS antenna, NavNet TZtouch2 is a beauty
to behold and use. Whether you are searching for hot fishing grounds, plotting
your next route, or using your Radar to navigate through fog, TZtouch2 delivers
smooth operation with familiar touch gestures. Sporting and edge-to-edge glass
front, NavNet TZtouch2 is beautifully designed, allowing you to build a
navigation suite that is not only functional, but offers a luxurious look and
feel.
Following in the footsteps of the original NavNet TZtouch, TZtouch2 is all
about usability - the newly refined graphical user interface makes operation a
breeze! Accessing different displays is achieved by tapping on the Home icon, or
utilizing the new “Edge Swipe” motion. Swiping from the left edge reveals the
NavData panel, where you can customize content to simplify navigation and chart
usage. From here, you can set the autopilot, check tide information and much
more. Swiping up from the bottom of the screen unveils the new Layers menu, a
practical way of changing settings on the fly without having to venture into
deeper menu systems. Since the screen remains visible at all times, changing
settings is now simpler than ever. There are similar, contextual functions when
available by swiping from the top or right side of the screen.
Furuno TZTL15F NavNet TZtouch2 15.6" MFD Chart
Plotter/Fish Finder
A 56-channel Furuno GPS Receiver is built into the display. You can connect
an external antenna for redundancy, but the primary GPS receiver is built-in,
saving you money on additional equipment and installation cost.
The built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power
output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish
modes, and also incorporates another new Furuno proprietary Fish Finder
technology, called RezBoost. RezBoost is a revolutionary new feature that
utilizes Furuno’s exclusive digital signal processing protocol to produce
fantastic target resolution and separation, without the need to change out your
transducer, or purchase expensive broadband transducers. With RezBoost, you can
now achieve target separation and resolution that was previously limited to
Furuno commercial-grade Fish Finders.
Furuno FCV628 5.7" Fishfinder with RezBoost
The 5.7" FCV628 uses revolutionary new RezBoost™ technology that increases
resolution and improves target separation utilizing a compact, narrowband
transducer.
RezBoost™ is a revolutionary new signal processing technology developed by
FURUNO that improves resolution and target separation when using conventional
narrowband transducers. Spot individual game fish surrounding bait balls, as
well as fish close to the seabed. With RezBoost™, not only can you expect higher
resolution and crisper visuals, but also improvements in the ACCU-FISH™
function.
With RezBoost™ the capabilities of conventional narrowband transducers can be
dramatically improved. Compared to conventional signal processing techniques (FDF),
a RezBoost™ fish finder produces an image that is up to 8 times clearer. What
can be done with a conventional narrowband transducer, just like the one you
might have installed on your vessel, is truly impressive.
With RezBoost™ technology, the resolution is increased, leading to sharper and
more defined echoes. Thanks to this increase in resolution, the accuracy of the
ACCU-FISH™ function is also improved. ACCU-FISH™ is very useful when you need to
determine fish size, but also has the added benefit of making fish echoes more
visible when viewed from a distance. With ACCU-FISH™ you can spot individual
fish echoes even from the deck on your vessel.
Furuno FCV588 8.4" Fishfinder with RezBoost
The 8.4" FCV588 uses revolutionary new RezBoost™ technology that increases
resolution and improves target separation utilizing a compact, narrowband
transducer.
RezBoost™ is a revolutionary new signal processing technology developed by
FURUNO that improves resolution and target separation when using conventional
narrowband transducers. Spot individual game fish surrounding bait balls, as
well as fish close to the seabed. With RezBoost™, not only can you expect higher
resolution and crisper visuals, but also improvements in the ACCU-FISH™
function.
With RezBoost™ technology, the resolution is increased, leading to sharper
and more defined echoes. Thanks to this increase in resolution, the accuracy of
the ACCU-FISH™ function is also improved. ACCU-FISH™ is very useful when you
need to determine fish size, but also has the added benefit of making fish
echoes more visible when viewed from a distance. With ACCU-FISH™ you can spot
individual fish echoes even from the deck on your vessel.
Recognize individual or multiple fish instantaneously! ACCU-FISH™ is a fish
size assessment function of FCV588 that is proprietary to FURUNO. In order to
assess individual fish size, echo returns are evaluated based on strength and
turned into fish size display on screen. ACCU-FISH™ can detect fish size from 10
to 199 cm, in depths of 2 to 100 m.
Furuno FCV295 10.4 inch Fish Finder
The FCV-295 is a new color digital sounder designed for a variety of
professional fishing operations. It features a bonded ‘fogging-free’ 10.4" LCD
display providing superior viewing even in direct sunlight. You can display
echoes in 8, 16, or 64 colors, with color assignment dependent on the strength
of the returned echo.
The FURUNO Free Synthesizer (FFS) Transceiver allows a wide selection of
operating frequencies. You may choose any two frequencies between 28 and 200 kHz
to fit your fishing operation. Output power is selectable from 1, 2 or 3 kW. A
wide variety of display modes and functions are available, which provide
skippers with simple and intuitive information.
When FURUNO transducers are connected and set to the FCV-295, the operating
frequency range will be registered and shown in the menu. The user can shift the
operating frequency freely between the ranges at any time from the menu. With
the FURUNO 82B-35R transducer, the operator can select any operating frequency
from 66 to 109 kHz. This feature is particularly useful for vessels targeting
many different species, or when the fish finders of other ships in the area
cause interference.
Furuno FCV1150 12.1 inch Color Fishfinder
The FCV1150 is a color digital sounder designed for a variety of professional
fishing operations. It’s high-brightness 12.1” color LCD with AR coated glass
filter provides superior, glare-free viewing even in direct sunlight.
The FCV1150 employs Furuno Free Synthesizer (FFS) technology which permits a
wide selection of operating frequencies from 28 to 200 kHz. If a Furuno
transducer is used, operating frequency is automatically set in the menu, and
can be shifted manually at any time. This feature is useful for vessels
targeting many different species of fish, and may also be used to eliminate
interference that may be caused by nearby ships with transducers operating at
the same frequency. Output power is selectable among 1, 2 or 3 kW.
A wide variety of display modes and functions are available that provide
captains with simple and intuitive information for virtually any fishing
requirement including Single (HF/LF), Dual, Single + Zoom, Zoom (Bottom Lock,
Bottom Zoom or Marker Zoom), Mix Mode, Nav Data and A-Scope. Additionally, two
custom display modes may be programmed by the operator. The FCV1150 can be
interfaced with a Furuno Satellite Compass to compensate for heaving caused by
the movement of the ocean, providing unwavering, stable detection even in rough
seas.
Furuno FE800 IMO Compliant Echo Sounder
The FE800 is a result of Furuno's many decades of experience developing echo
sounders, sonars, and underwater application equipment and systems. This echo
sounder is a breakthrough over the conventional paper sounders; there are no
consumable items. The purpose of the echo sounder is to provide safe navigation
by detecting the clearance below the ship (particularly in shallow waters) as
required on the SOLAS Convention ships by the new IMO standards.
The basic system consists of a display unit and distribution box. The 8.4"
high-brightness color LCD display offers an easy-to-read depth sounding in
various modes, permitting optimum representation with respect to the
environment.
Detection range is automatically varied but there is manual override to select
the required scale. The displayed record is visible for 15 min on any range and
an instantaneous sounding is directly shown in large numerals in addition to the
graphical display. Depths, associated time, and position are stored for 24 h in
memory. The data can be played back at any time.
Furuno DFF1-UHD TruEcho CHIRP Sounder Module
Designed to operate over a wide range of frequencies utilizing a broadband
transducer, the new DFF1-UHD TruEcho CHIRP-enabled network sounder for NavNet
TZtouch and NavNet 3D delivers significant advancements in signal clarity and
target definition. The clear presentation of the DFF1-UHD marks individual game
fish and bait fish, even when tightly schooled together or very near the sea
floor.
Standard, non-CHIRP Fish Finders operate at one or two individual frequencies
and are generally capable of detecting targets and displaying them only within
those narrow frequency bands. CHIRP Fish Finders transmit pulses across a wide
range of frequencies, allowing Furuno’s superior digital signal processing (DSP)
to display fish and structure targets with unparalleled clarity, accuracy and
resolution.
