• Sidewinder Parts Guide
• Mx Holder Parts Guide
• Mx Installation Guide
• Junior Parts Guide and Mounting Instructions
• Pipe Size Chart
• Replacement Wire Guide
• Gunnel Mount Instructions
• Rod Holder Specifications
• Rigging Kit Installation
• Outrigger Spike
• Sr Holder Mount

Sidewinder

Bolt-On

Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. Available with 5 Position Quick Laydown. No ball bearings to rust. Internal Delrin and nylon bearing 1surfaces provide smooth operation and prevent metal to metal contact. Accepts our Telescoping Outrigger ( TX Series), our one piece semi tapered Carbonfiber Outriggers (CX Series) as well as our Standard 16 ft. Extra Strong (AP3916XS) or 18Ft (AP3918), Outrigger Pole. Has 4"x6" Mounting plate. Extends 14" above and 8-1/2" below mounting plate. Fits all outrigger ready boats. Back-Up Plates available for hard-top installations SW990 - 4"x6" Optional 4" wide pre-anodized Weld-In Plate simplifies installation SW9903-0012 Weld in Plate 12 in. SW9903-0024 Weld in Plate 24 in.

Weld On Used by many of today's Premier Boat Manufacturers and Aluminum Fabricators, the Sidewinder has proven itself to be strong, reliable and versatile. The body of the unit is available in either high polished or brush finish to match the type of pipe being used. The body can also be incorporated and powder coated along with the structure. Attachment can be made in numerous ways. Can be added along side or incorporated into the structure. Rotation locks in two position, straight back running and 80 degrees out trolling. Available with 5 Position Quick Lay-Down. Internal Delrin and Nylon Bearing Surfaces allow smooth operation and prevent metal to metal contact.

Recomended Poles for the Sidewinder

• Standard Bolt Together Poles
• AP3916XS - 16 ft. · Extra Strong · Bright Silver Finish with Black Spike
• AP3918 - 18 ½ ft. · Bright Silver Finish with Black Spike
• Telescoping Poles
• TX3916SL/SL - 16 ½ ft. Bright Silver With Silver End Caps and Black Spike
• TX3916SL/GL - 16 ½ ft. Bright Silver With Gold End Caps and Gold Spike
• Carbon Fiber Poles
• Single Rigged
• CX3915 - 15 ft. Carbon Fiber Poles Tapered One piece/ Semi Taper
• Double Rigged
• CX3916 - 16 ft. Carbon Fiber Poles Tapered One piece/ Semi Taper
• CX3918 - 18 ft. Carbon Fiber Poles Tapered One piece/ Semi Taper
• CX3920 - 20 ft. Carbon Fiber Poles Tapered One piece/ Semi Taper
• Step Tube Style Poles
• SX3916XS - 16 ft. · Extra Strong · Bright Silver Finish with Black Spike
• SX3918 - 18 ½ ft. · Bright Silver Finish with Black Spike

The Original Wishbone Style Outrigger Holder has been in production for over 45 years. Setting the standard for the industry, our "Junior" outrigger holder has often been imitated, but never equaled. Its ease of operation, adjustable fishing angle, ability to lay down for bridges and small footprint makes it the ideal holder for a multitude of boats. Durability was the watchword at its conception. You won't find plastic parts in this holder. Constructed of heavy duty brass forgings, heavy wall brass pipe and a stainless steel main tube, it epitomizes strength and reliability. The three point mounting system provides maximum strength and distributes the stress to the mounting surface over a wide area. This holder can be mounted vertically or angled toward the stern. Somewhere between twenty to thirty five degrees is normal.

Our "Junior" design is available in two sizes, the 2" x 18" Main Tube (OH226S) and the 2" x 36" (OH234S). Model OH226S is for use with our deluxe 19ft. single spreader poles and non-spreader poles up to 22ft. For double spreader poles longer then 20ft. we recommend the OH234S. To deploy the rigger into the fishing position, simply open the locking gate and loosen the clamp housing. The clamp housing then slides down the main tube until you either lock it or it meets the stop collar for a preset fishing position. To lower the unit for passing under bridges, the locking gate stays closed and the clamp remains locked to the top of the main tube. The eye bolt is removed, thus separating the clamp housing from the wishbone. The main tube is then lowered into the supplied lay down hook.

• AP3516XS - 16 ft. Bright Silver Finish pr.
• AP3519 - 18 ½ ft. Bright Silver Finish (Mk II) pr.
• AP3519XS - 19 ft. Extra Strong Bright Silver Finish (Mk II) pr.
• AP3522 - 22 ft. Bright Silver Finish (Mk II) **Spreader Kits Available.**
  
• TX3517SL/SL - 16 ft Telescoping Outrigger Base Plastic fits 2 in SS Tube Standard Pole
• TX3517SL/GL - 16 ft Telescoping Outrigger Base Plastic fits 2 in SS Tube Standard Pole
• MX8516SL/SL - 16 ft. Bright Silver Pole with Silver Spreader
• MX8516SL/GL - 16 ft. Bright Silver Pole with Gold Spreader
• MX8519SL/SL - 19 ft. Bright Silver Pole with Silver Spreader

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Available in two sizes, 1-3/4" OD & 2" OD "The Super Skiff" Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

• Poles that fit the OH2018S, and the OH201F Skiff Holders
• AP3716XS - 17 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3718 - 19 ft. 6 Sections with Bright Silver Finish, and Black Spike
• TX3717SL/SL - 17 ft. Telescoping, Bright Silver Finish, with Silver End Caps and Black Spike
• CX3920 - 20 ft Double Rigged Carbon Fiber Outrigger

• Poles that fit the OH2020S, and the OH219F Skif Holders
• AP3719SK - 18.5 ft. 6 Sections with Bright Silver Finish, and Black Spike
• AP3719XS/SK - 19 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3722SK - 22 ft. 6 Sections with Bright Silver Finish, and Black Spike
• CX3920 - 20 ft. Double Rigged Carbon Fiber Outrigger

All Center Riggers

Compatible poles for AL7001CR (1-3/8"ID)	Compatible poles for AL7211CR (1-3/8"ID)
AO8712CR - 12 ft Center Rigger (Mk II)	AO8712CR - 12 ft Center Rigger (Mk II)
AO8715CR - 15 ft Center Rigger (Mk II)	AO8715CR - 15 ft Center Rigger (Mk II)
MX8713CR - 13 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style	MX8713CR - 13 ft MX Step- Tube Style
	MX8715CR - 15 ft MX Step- Tube Style
Compatible poles for MX7001CR, MX7002CR, MX7003CR (1-1/2" ID)	Compatible poles for AL7300CR (1-3/8"ID)
CX8712CR - 12 ft Carbon Fiber	AO8712CR - 12 ft Center Rigger (Mk II)
CX8715CR - 15 ft Carbon Fiber	TX8712CR - 12 ft Telescoping Center Rigger
MX8713CR - 13 ft MX Step- Tube Style	MX8713CR - 13 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style
MX8716CR - 16 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style
AO8716CR - 16 ft Center Rigger (Mk II)
AO8718CR - 18 ft Center Rigger (Mk II)
Compatible poles for AL7000CR (1-3/8" ID)	Compatible poles for MX7000CR (1-1/2" ID)
MX8713CR - 13 ft MX Step- Tube Style	CX8712CR - 12 ft Carbon Fiber
MX8715CR - 15 ft MX Step- Tube Style	CX8715CR - 15 ft Carbon Fiber
AO8712CR - 12 ft Center Rigger (Mk II)	MX8713CR - 13 ft MX Step- Tube Style
AO8715CR - 15 ft Center Rigger (Mk II)	MX8715CR - 15 ft MX Step- Tube Style
	MX8716CR - 16 ft MX Step- Tube Style
	MX8718CR - 18 ft MX Step- Tube Style
	AO8716CR - 16 ft Center Rigger (Mk II)
	AO8718CR - 18 ft Center Rigger (Mk II)
Compatible poles for MX8000CR (1-5/8" ID)	Compatible poles for MX7211CR (1-1/2"ID)
CX8712CR - 12 ft Carbon Fiber	CX8712CR - 12 ft Carbon Fiber
CX8715CR - 15 ft Carbon Fiber	CX8715CR - 15 ft Carbon Fiber
MX8716CR - 16 ft MX Step- Tube Style	MX8713CR - 13 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style	MX8715CR - 15 ft MX Step- Tube Style
	AO8712CR - 12 ft Center Rigger (Mk II)
	AO8715CR - 15 ft Center Rigger (Mk II)

The Following AP3900 Series Poles fit Lee the Sidewinder Holders with a 1-5/8 in. ID

• 
• AP3916XS - 16 ft. Extra Strong 5 Sections with Bright Silver Finish, and Black Spike
• AP3918 - 18-1/2 ft. 6 Sections with Bright Silver Finish, and Black Spike

The Following AP3500 Series Poles fit the Lee Junior/Wishbone Style Holders with a 1-7/8 in. ID

• 
• AP3516XS - 16 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3519 - 18-1/2 ft. 6 Sections with Bright Silver Finish, and Black Spike
• AP3519XS - 19 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3522 - 22 ft. 6 Sections with Bright Silver Finish, and Black Spike

The Following AP3700 Series Poles fit the 1 3/4 in. Skiff Holders Lee Holders with a 1-1/2 in. ID

• AP3716XS - 17 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3718 - 19 ft. 6 Sections with Bright Silver Finish, and Black Spike

The Following AP3700 Series Poles fit the 2 in. Skiff Holders Lee Holders with a 1-3/4 in. ID

• AP3719SK - 18-1/2 ft. 6 Sections with Bright Silver Finish, and Black Spike
• AP3719XS/SK - 19 ft. 5 Sections with Bright Silver Finish, and Black Spike
• AP3722SK - 22 ft. 6 Sections with Bright Silver Finish, and Black Spike

NOTE: Spreader Kits for the original AP300/AP3000 Series poles and the new AP3000Mk II poles series are not interchangeable. Call Lee’s to determine the correct kit model for your outrigger pole.

• SX3916XS 16 ft. · Extra Strong Bright Silver Finish with Black Spike (Shown)
• SX3918 18 ½ ft. · Bright Silver Finish with Black Spike

TX3916SL/SL - 16 ½ ft. Bright Silver With Silver End Caps and Black Spike
TX3916SL/GL - 16 ½ ft. Bright Silver With Gold End Caps and Gold Spike

Carbon Fiber Telescoping Outrigger

Now available at Lee’s Tackle – Advanced Carbon Composite Telescoping outriggers. Up to 20 feet in length, our carbon fiber poles are strong and perfect for trolling a variety of baits. Each pole weighs less than 3 1/2 pounds. Designed to fit Lee’s Sidewinders. Options are available to fit other Lee’s holders and name brands. Sold in Pairs.

TC3916 - 16 Ft. Carbon Fiber Telescoping Pole
TC3918 - 18 Ft. Carbon Fiber Telescoping Pole
TC3920 - 20 Ft. Carbon Fiber Telescoping Pole

The same advanced aerospace technology used in the America’s Cup and other cutting edge marine products has come to outriggers. The result is an outrigger that is almost half the weight and significantly stiffer than a traditional aluminum outrigger pole. The Lee’s Carbon Fiber Outriggers, unlike our competitors who merely replace the aluminum tubing in a traditional outrigger with carbon tubes, ours are made from uniquely engineered, one piece, semi-tapered tubes of incredible strength and stiffness. The tubes, which are made of continuously braided carbon filaments woven on specially designed mandrels, are optimized to withstand the stresses associated with pulling large lures, big baits or spreader bars. These are the outriggers of choice for the sportsman who demands the best products available.

• • Light Weight – Makes deplyment, retrieval, raising and lowering a breeze.
• • Stiffness – Spreaders become unnecessary.
• • Internal halyards enter and exit through rollers at reinforced openings -
  
• • Outriggers come pre-rigged with 400 lb. black mono.
• • Clear coat finish is standard – optional custom paint color is available.
• • Fits Lee’s Sidewinder and other T-Top outrigger holders.
• • Modified versions are available for other holder configurations.

Features:

• Double Rigged
• CX3916 - 16 ft. One piece/Semi Taper
• CX3918 - 18 ft. One piece/Semi Taper
• CX3920 - 20 ft. One piece/Semi Taper
• Single Rigged
• CX3915 - 15 ft. One piece/Semi Taper
• Center Rigger
• CX8712CR - 12 ft. One piece/Semi Taper
• CX8715CR - 15 ft. One piece/Semi Taper

No matter what size outrigger you have, Lee's has a rigging kit to suit your needs. From Single to Double Kits, we have it all. Products include Complete Kits, Line Kits, Release Clips and individual components. Line types include 400# test Black Braided Polyester as well as 400# test Black Monofilament. All Kits include Tension Cords, Eye Straps and Snap Swivels, and Ball Stops.

Rigging Kits for Outriggers up to 25 feet

Rigging Kits for Outriggers up to 37 feet

tx

Rigging Kits for Centerriggers