A VETUS stern thruster in combination with a VETUS bow thruster will provide even greater manoeuvrability of your boat in locks or harbours..

Docking was never this easy Combining a VETUS stern thruster with a VETUS bow thruster, will provide an even greater manoeuvrability of your boat in locks or harbours. By placing a side-directional thruster in the bow and another one at the transom, docking, sailing away, finding a spot in the lock or marina, becomes child’s play! Even the effects of wind and current can be effectively countered. Installation of a VETUS stern thruster is simple, the electric motor and other electric components are fitted internally to the transom of the boat. The tunnel and the propeller are installed externally on the transom.

Note

The range of 7 different stern thruster kits can make 14 different stern thruster models

These kits may also be used with ‘ignition protected’ thrusters and extended runtime thrusters

Internal tunnel diameter (inches)	4 59/64
Size A in inches, see drawing	1ft 6 7/64
Size B in inches, see drawing	ft 2 11/64
Size C in inches, see drawing	1ft 21/64
Size D in inches, see drawing	9 27/32
Size E min. in inches, see drawing	1ft 2 9/16
Size F, diameter in inches, see drawing	7 7/8
Size G max. in inches, see drawing	2 9/32
Size H see drawing (inch)	8 15/64
Size I in inches, see drawing	4 3/8

Installation Guide

View (pdf)

WARNING: This product can expose you to chemicals including Di-n-hexyl Phthalate, DnHP, which is known to the State of California to cause reproductive harm, and Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.