The brains behind the brawn, the AC70 is an essential component in your autopilot system. It contains the steering computer and electronics for the drive unit motor and clutch whilst also acting as an interface to other system components.

Drive computer for rudder using reversible motor or non-isolated solenoids and frequency rudder angle feedback. Connection for NFU remote control and one channel IEC 61162-1 (NMEA 0183) RX/TX or IEC 61162-1,2 and 3 compatible.

• Boats Over 40ft
• NMEA0183 Connectivity

Specifications

Weight

1 kg (2,2 lbs)

Compass Safe

1 m (39,37")

Power Consumption typical

100mA + Drive load

Supply Voltage

12/24VDC +30 -10%

Drive output

12/24VDC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)

Operating Temperature Range

-15 to +55C (5 to 131F)

NMEA 2000 Connectivity

1x CAN terminal, 1 LEN

Warranty Period

2 years

Dimensions W x H x D

211 x 180 x 60mm (8,29 x 7,08 x 2,36")

Storage Temperature Range

-30C to +70C (-22F to +158F)

Power Consumption max

750W

Mounting Type

Bulkhead

NMEA 0183 Sentences supported

Input: AAM, ACK, APB, BOD, BWC, DPT, GGA, GLL, HDG, HDT, HSC, RMA, RMB, RMC, ROT, THS, TNT, VBW, VHW, VLW, VTG, ZDA. Output: HDG (10Hz) or HDT (10Hz), RSA (5Hz)

Recommended Fuse Rating

Internal fuse 30A (Slow)

Waterproofrating

IPx2

Compasssensor support

NMEA2000, NMEA0183

Engine Drive systems integration

Reversible pump/motor, Solenoid valve on/off

Rudder sensor s upport

RF300, RF45X, RF25N, RF70