Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base

The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.

The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.

*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).

Wedge Base Features:

• Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
• Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
• Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
• No need to cut the Starlink connectors for installation.
• Available in white or black