• Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
• ON-OFF Contura Switches
• ON indicating LEDs embedded in switches
• Watertight mounting gasket included
• Countersunk mounting holes throughout
• Heavy 1/10"aluminum material
• Two-part polyurethane slate gray finish
• Industry standard height and width
• Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
• Completely wired and ready to install
• Includes set of common DC labels
• Over 500 labels available

  NOTE: Waterproof panel labels are not backlit

 

Specifications

Fuse Holder Rating	20 Amperes maximum (15 Ampere fuses included)
Maximum Voltage Rating	24 Volts DC
Weight Lb (Kg)	0.75 (0.34)
Voltage	12 or 24 Volts DC
Panel Cumulative Rating	45 Amperes
Switch Rating	20 Amperes@12 Volts DC, 15 Amperes@24 Volts DC
Width in" (mm)	5.25 (133.35)
Height in" (mm)	3.75 (95.25)

Installation

Note: cutout templates must be print at actual size. Some programs, including Adobe Reader, will scale the image to fit the page at their default settings. See Printing Cutout Templates at Actual Size for details.

• Instructions
• Cutout Templates

Product Catalog

• 4 Position-Slate Gray on 2012 Catalog Page 73

WARNING: This product can expose you to chemicals including Di-n-hexyl Phthalate, DnHP, which is known to the State of California to cause reproductive harm, and Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.