Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000^® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures (live well bait, hot water, etc.), and air duct temperatures. The optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system.

Best of all, the TMP100 is NMEA 2000^® certified so you can view any and all temperature information anywhere on the vessel using a compatible NMEA 2000^® display. The TMP100 is a key component of Maretron's N2KView^® vessel monitoring and control system.

• Six external temperature probes are measured and broadcast Over NMEA 2000^® network
• Four channels for thermistor probes and two channels for high temperature thermocouple probes
• Wide variety of applications supported with optional temperature probes

Application:

• Cabin temperature
• Engine room temperature
• Under bolt temperature (Inverters, chargers, pumps, etc.)
• Refrigerator / freezer temperature
• Tank temperatures (Live well bait, hot water, etc.)
• Air duct temperature
• Exhaust gas temperature

  Quick Guide	View (pdf)
  Owners Manual	View (pdf)

This comprehensive temperature monitoring system monitors six temperatures, including two exhausts, using Maretron’s 8” TSM800C touchscreen, a Temperature Monitor (TMP100) and six Maretron temperature transducers. The Ethernet gateway allows you to view the temperatures on a smartphone or tablet so you can observe all data remotely. Finally, the Vessel Data Recorder (VDR100) keeps a complete record of all the temperatures, with the GPS200 providing reference positions and times.

In addition, the software in the TSM800C touchscreen can monitor all the temperatures and sound an alarm if any of them goes higher or lower than a preset limit.

Note that the first two channels of the TMP100 match to thermocouple transducers which makes them ideal for exhaust temperature monitoring, and the remaining four channels match to thermistor transducers.