The Internet Protocol Gateway, IPG100, lets you connect Maretron black box processors, Maretron touch screens, PC’s or Mac’s, tablets, or smartphones to an NMEA 2000® network so you can monitor and control your vessel using Maretron’s N2KView® software. The conventional way of viewing NMEA 2000® information is with a display on the vessel that is directly connected to an NMEA 2000® network, but with the IPG100, you are not limited to directly connected displays. With the IPG100, you can use any device running N2KView® software to monitor and control your vessel from onboard or ashore.

The IPG100 has an NMEA 2000® and an Ethernet data port for exchanging information between the onboard NMEA 2000® network and Internet Protocol (IP) enabled devices using conventional technology such as routers, switches, and wireless modems. Once enabled, the IPG100 will automatically connect to Maretron’s Real Time Cloud Service, which allows you to remotely connect to your vessel via the Internet. This allows you to keep an eye on your vessel from anywhere in the world. In addition, the IPG100 includes a USB port used for connecting Maretron’s hardware license key. The hardware license key is used to enable remote devices running N2KView® software. For example, if you purchase three N2KView® license keys, you can run N2KView® at the helm, another on a handheld device connected via Wi-Fi, and another at home on your PC or Mac with an Internet connection back to the vessel. The licenses are floating, so if you were to shut down N2KView® running at home, you could fire up the third N2KView® license on the vessel.

• NMEA 2000® Connector: DeviceNet Micro-C (Industry Standard Waterproof)
• NMEA 2000® Isolation: Opto-Isolated (No Electrical Connection Across Bridge)
• USB Standard: USB 1.1
• USB Connector: USB Type A (Industry Standard Waterproof, for Connection of N2KView Hardware License Key Only)
• USB Supported Signals: D+, D-, +5V, GND (Bi-directional Gateway)
• USB Auxiliary Power: +5 Volts < 200 mA
• USB Baud Rate: Up to 12 Mb/s (Full Speed USB Data Rate)
• Ethernet Interface: 100 Mb/s
• Ethernet Connector: RJ-45 (Industry Standard Waterproof)
• Operating Voltage: 9 to 32 Volts (DC Voltage)
• Power Consumption: <150mA (Average Current Drain)
• Load Equivalence Number (LEN): 3 (NMEA 2000® Spec. [1LEN = 50 mA])
• Reverse Battery Protection: Yes (Indefinitely)
• Load Dump Protection: Yes (Energy Rated per SAE J1113)