LC-2CP-MD Curve

 LC-2CP-MD Pump Manual

Options:

O-Ring: Buna N, Viton, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Impeller: Polypropylene or Delrin

Reference Information

 Dimensional Drawing LC-2CP-MD 115V

 Dimensional Drawing LC-2CP-MD 230V

 Dimensional Drawing LC-2CP-MD 115V DWG (115 KB)

 Dimensional Drawing LC-2CP-MD 230V DWG (115 KB)

March Pump's industrial LC-2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (or around 5.5PSI).  The LC-2CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Stainless Steel, Ceramic, and Ceramic Magnet.  When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread and 0.75 inch male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.028 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-2CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March LC-2CP-MD is suitable for your application, please contact March Pump.

Perfect for Applications Including

The most common application for the LC-2CP-MD Magnetic Drive Pump is for marine air conditioning and fountains. 

Great for Chemicals Including

The LC-2CP-MD has pumped Fresh Water and Salt Water. The LC-2CP-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the LC-2CP-MD for any of the above listed chemicals.   

Warranty 
 

March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date. 

In all events, liability is limited to the purchase price and to the replacement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.