Power Modules function as power supply or battery charger; 12, 24 or 48 volts; positive, negative floating ground. Wire in parallel to create systems from 500-6,000 watts. Optional quick connect wiring kit allows swap-out of modules without system shutdown. 115/230 VAC, 50-60 Hz input. 19″ or 23″ rackmount standard. Bulkhead/shelf mounting bracket optional.

Specifications

Performance Specifications

Input:
85 – 135/170-270 VAC (selectable), 47 – 63 Hz., 560 watt models
90 – 265 VAC, 1000 watt models
207 – 253 VAC, 2200 watt model

Power Factor:
0.7, 560W & 2200W models
0.98, 1000W models

Regulation: +/- 1% at direct output (V2); +/- 2% through “oring” diode (V out)

Ripple: 1% (Typical)
Efficiency: 80-85% @ full load
Front panel Output Voltage Adjustment Pot Range: +/- 10%
Altitude Range: Full output to 5,000 feet. Derate output current 4% per 1,000 feet to 10,000 feet max.

Temperature Rating

560 watt models: -40˚ C; Derate linearly from 100% load @ 50˚ C to 75% @ 60˚ C
1000 watt models: -20˚ C; Derate linearly from 100% load @ 50˚ C to 50% @ 70˚ C
2200 watt model: 0 – 50˚ C

Mechanical/General

• Powder coated aluminum front panel and cover
• Vinyl laminated base and cover
• 19″ Rackmount brackets provided
• Wallmount via optional brackets
• AC Input wiring:
  • 560 watt units: IEC AC entry, 6′ IEC cord with NEMA 5-15 plug provided
  • 1000 watt units: IEC entry, 6′ IEC power cord with NEMA 20 plug provided
  • 2200 watt unit: Hardwire junction box, no power cord provided
• 1/4″ -20 Output stud (560 watt models)
• Output bus bar (1,000 and 2200 watt models) with 1/4″ – 20 bolts
• Output “OK” L.E.D.
• Multi color LED: Green = Ok, Red = Fail (1000W models only)
• Loss-of-output alarm contacts- Form C, plus loss of AC alarm contacts – Form C (1000 and 2200 watt units only)
• Front panel voltage test points

Options

• Three stage charger function with gel/ lead-acid selector Model: CFB (560 & 1000 watts only)
• Temperature compensation (for battery charging). All models.
• DC Quick Connect Wiring Kit:
  • 560 watt models: QCK-3 (for 2-3 unit PM system) & QCK-6 (for 4-6 unit PM system)
  • 1000 watt models: QCK-3A (for 2-3 unit PM system) & QCK-6A (for 4-6 unit PM system)
  • 2200 watt model: CCK-4
• “Universal” mounting bracket; Model: UMB-PM (500 & 1KW models only)
• Metering, alarms, LVD and distribution breakers (PFM-400 or ULM-100 module options)

Protection

• Output fuse for reverse polarity
• Current limit
• Input circuit breaker
• Automatic high temp. output
  power reduction (560W & 2200W models)
• Forced air cooling with filter provided (560W models only)

Design Standards

• UL 1950 / EN 60950 (Safety)
• EN 50082 (Immunity)
• EN 55014 (Conducted)
• Case Size – All Models

Case Size – All Models

Height X Width* X Depth
Inches: 3.5 X 17 X 20.5
Centimeters: 13.5 X 43.2 X 52.1
*19″ mounting brackets provided