Raymarine Quantum 2 Q24D Doppler Radar 24nm with 15m Power & Data Cables T70417

Home > Electronics > Marine Radar > Raymarine Radar > Raymarine Radar Antenna >

Brand New with Factory's Warranty

List Price: US$2,449.99

Our Price: US$2,449.99
Free Ground shipping to Lower 48 States

Availability:: Usually ships the next business day
Product Code: T70417

Description

Extended Information

Compatible with Axiom and Axiom Pro

Introducing Raymarine Quantum 2 Radar with Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges.

Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas.

Easily Identify Dangerous Targets

Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.

Safer Navigation

Quantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary).

Superior Collision Avoidance

Doppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard.

Key Features

Doppler moving target display allows for superior situational awareness at-a-glance
Fully automatic ARPA target tracking, along with manual MARPA mode
Adjustable TrueTrails target history shows the motion history of moving contacts
CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation
24-mile range for early detection of traffic, navigation aids, landfall and weather
Immediate awareness – Quantum starts up and is ready to go in seconds
Superior interference rejection eliminates noise from other radars
Simplified installation with Wi-Fi or thin wire network connectivity
Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners
Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars
Safe emissions – mount Quantum anywhere onboard
Low power consumption for extended battery life under sail

HOW DOPPLER RADAR WORKS

Microwave energy waves are bounced off of a distant target, just like conventional radar.

Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted.

For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases.

For outbound targets, the frequency drops as the returning echoes spread out as its range increases.

Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets.

DOPPLER TARGET PROCESSING

Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.

Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away.

Inbound targets are colored red.
Outbound targets are colored green.

Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels.

QUANTUM 2 SAFTEY SECTOR

Doppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.

Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include:

Buoys.
Exposed Hazard (rocks, pilings, etc).
Slow moving, low visibility vessels.

Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m.

NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red.

The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics.

Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely.

Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.

The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

GENERAL SPECIFICATIONS

Dimensions: Diameter \| Height	541.0 mm \| 209.5 mm
Weight:	5.6 kg
Supply voltage:	Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc \| Maximum: 31.2 V dc
Power consumption:	Transmit mode (maximum): 17 W \| Standby mode: 7 W \| Sleep mode (applies only to radars connected via Wi-Fi): 2 W
Waterproofing:	IPX6
Operating temperature range:	-10°C to +55°C
Storage temperature range:	-25°C to +70°C
Additional storage conditions:	Store upright; do not block vents on underside
Humidity:	Up to 95% at 35°C
Maximum wind speed:	100kts

TRANSMITTER

Type:	X-band solid-state transmitter with pulse compression technology
Transmit frequency:	9354 MHz to 9446 MHz
Peak power output:	20W
Duplexer:	Circulator
Pulse widths (3 dB):	40 ns to 14.7
Chirp lengths:	Chirp lengths: 400 ns to
Pulse reptition frequency:	2083 Hz
Chirp bandwidth:	Up to 32MHz
Standby mode:	Scanner rotation - OFF \| Scanner transmission - OFF \| Wi-Fi link - ON

ANTENNA

Type:	Patch array
Beamwidth (nominal):	Horizontal: 4.9° \| Vertical: 20°
Polarization:	Horizontal
Rotation speed:	24rpm nominal

DOPPLER

Target Tracking:	Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA)
Target Filtering:	True Motion mode identifies only those objects that are moving relative to the vessel

IN THE BOX
1	Quantum 2 radome

2	M8 mounting bolts with spring washers and flat washers
3	Documentation pack (including mounting template)

Installation Manual

Quick Guide	View (pdf)
Installation Guide	View (pdf)

Note: The price is subject to change at any time without any notice. Not responsible for any typographical errors. Any products can be cancelled from sale at any time.

All products sold here come with Full Manufacturer's Warranty
Email us at
[email protected] for any quesitons
WARNING: This product can expose you to chemicals including Di-n-hexyl Phthalate, DnHP, which is known to the State of California to cause reproductive harm, and Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.